CMI Publications

CMI researchers share their developments through refereed journal articles -- more than 680 since the Energy Innovation Hub launched in 2013

Nexight Group conducted a bibliographic analysis of CMI publications to develop a profile of the CMI’s research community, identify growing and emerging research fronts in critical materials, and describe the impact the CMI publications have had on the research community. The analysis focused on 475 CMI publications from 2013 through 2022.

CMI researchers have published more than 680 publications since 2013. Selected publications are noted. A complete list is available on request.

2024

  • L. An, Y. Yao, T.B. Halla, F. Zhao, and L. Qi, “Agile synthesis and automated, high-throughput evaluation of diglycolamides for liquid–liquid extraction of rare-earth elements,” Green Chem (2024) doi: 10.1039/D4GC01146E
  • C. Bhandari, G.N. Nop, J.D.H. Smith, and D. Paudyal, “Accurate machine-learning predictions of coercivity in high-performance permanent magnets,” Physical Review Applied (2024) doi: 10.1103/PhysRevApplied.22.024046
  • Z. Dong, J.A. Mattocks, J.A. Seidel, J.A. Cotruvo Jr., and D.M. Park, “Protein-based approach for high-purity Sc, Y, and grouped lanthanide separation,” Separation and Purification Technology (2024) doi:10.1016/j.seppur.2023.125919
  • E. Engmann, L.A. Diaz, T.E. Lister, A. Atifi, O. Palasyuk and H. Zhao, “Selective pseudocapacitive immobilization of REE elements on carbon based electrodes,” Electrochimica Acta (2024) doi:10.1016/j.electacta.2024.143860
  • B. Holcombe, N. Sinclair, R. Wasalathanthri, B. Mainali, E. Guarr, A.A. Baker, S.O. Usman, E. Kim, S. Sen-Britain, H. Jin, S.K. McCall, and R. Akolkar, “Sustainable and energy-efficient production of rare-earh metals via chloride-based molten salt electrolysis,” ACS Sustainable Chem. Eng. (2024) doi:10.1021/acssuschemeng.3c07720
  • A.Y. Ku, E. Alonso, R. Eggert, T. Graedel, K. Habib, A. Hool, T. Muta, D. Schrijvers, L. Tercero, T. Vakhitova, and C. Veeh, “Grand challenges in anticipating and responding to critical materials supply risks,” Joule (2024 – in press, available online) doi:10.1016/j.joule.2024.03.001
  • A.Y. Ku, E.A. Kocs, Y. Fujita, A.Z. Haddad, and R.W. Gray IV, “Materials scarcity during the clean energy transition: myths, challenges, and opportunities,” MRS Energy & Sustainability (2024) doi:10.1557/s43581-023-00077-9
  • R. Kuchi, D. Schlagel, T.A. Seymour-Cozzini, J.V. Zaikina, and I.Z. Hlova, “Exploiting mechanochemical activation and molten-salt-assisted reduction-diffusion approach in bottom-up synthesis of Sm2Fe17N3,” J of Alloys and Compounds (2024) doi:10.1016/j.jallcom.2024.173532
  • X.B. Liu and I.C. Nlebedim, “Segregation of Al and its effect on coercivity in Nd-Fe-B,” AIP Advances (Jan 1 2024) doi:10.1063/9.0000645
  • H. Parmar, M.P. Paranthaman, and I.C. Nlebedim, “Bi-modal particle size distribution for high energy product hybrid Nd-Fe-B-Sm-Fe-N bonded magnets,” AIP Advances (2024) doi:10.1063/9.0000819
  • J.R. Perez-Cardona, T. Maani, F. Zhao, and J.W. Sutherland, “Parametric design, life cycle assessment, and optimization of a discrete product with application to an electric traction motor,” Resources Conservation and Recycling (2024) doi:10.1016/j.resconrec.2023.107344
  • A. Sarkar, H.-W. Noh, I.C. Nlebedim, and P. Shrotriya, “Magnetic functionalization and catalytic behavior of magnetic nanoparticles during laser photochemical graphitization of polyimide,” APL Mater. 12 (2024) doi:10.1063/5.0191321
  • F. Zahariev, T. Ash, E. Karunaratne, E. Stender, M.S. Gordon, T.L. Windus and M. Perez Garcia, “Prediction of stability constants of metal-ligand complexes by machine learning and design of optimal ligands for metal ion selectivity,” J. Chem. Phys. (2024) doi:10.1063/5.0176000

2023

  • B. Adhikari, N.A. Chowdhury, L.A. Diaz, H.Y. Jin, A.K. Saha, M. Shi, J.R. Klaehn and T.E. Lister, “Electrochemical leaching of critical materials from lithium-ion batteries: a comparative life cycle assessment,” Resources, Conservation, and Recycling (2023) doi:10.1016/j.resconrec.2023.106973
  • B.Z. Cui, J. Cui, D.J. Barnard and L.J. Bond, “Internal defect detection and characterization of samarium-cobalt sintered magnets by ultrasonic testing technique,” JOM (2023) doi:10.1016/j.jmmm.2023.170524 
  • B.Z. Cui, X.B. Liu, I.C. Nlebedim and J. Cui, “Toughening Sm-Co sintered magnets via microstructure modification with additives,” JOM (2023) doi:10.1016/j.jmmm.2023.170434 
  • S. Deng, Z. Xiao, W. Zhang, A. Noble, S. Das, Y. Yih and J.W. Sutherland, “Economic analysis of precious metal recovery from electronic waste through gas-assisted microflow extraction,” Resources, Conservation and Recycling (2023) doi: 10.1016/j.resconrec.2022.106810
  • J.L. Fattebert, S. DeWitt, A. Perron and J. Turner, Thermo4PFM: facilitating phase-field simulations of alloys with thermodynamic driving forces,” Computer Physics Communications (2023) doi:10.1016/j.cpc.2023.108739 
  • Y.K. Frodason, P.P. Krzyzaniak, L. Vines, J.B. Varley, C. Van de Walle and K.M.H. Johansen, “Diffusion of Sn donors in beta-Ga2O3,” APL Materials (2023) doi:10.1063/5.0142671 
  • Y.K. Frodason, J.B. Varley, KMH Johansen, L. Vines and C.G. van de Walle, “Migration of Ga vacancies and insterstitials in ?-Ga2O3,” Physical Review B (2023) doi:10.1103/PhysRevB.107.024109
  • K. Gandha, M.P. Paranthaman, X.B. Liu and I.C. Nlebedim, “Thermal stability of anisotropic bonded magnets prepared by additive manufacturing,” J. of the American Ceramic Society (2023) doi:10.1111/jace.18609 
  • A. García Alejo, N. De Silva, Y. Liu, T.L. Windus and M. Pérez García, “Solvent phase optimizations improve correlations with experimental stability constants for aqueous lanthanide complexes,” Solvent Extraction and Ion Exchange (2023) doi:10.1080/07366299.2022.2160646
  • T.E. Graedel and A. Miatto, “Vanadium: A U.S. perspective on an understudied metal,” Environmental Science & Technology (2023) doi:10.1021/acs.est.3c01009
  • E.A. Holley, Z. Zaronikola, J. Trouba, K. Pfaff, J. Thompson, E. Spiller, C. Anderson and R. Eggert, “Cobalt minerology at the Iron Creek deposit, Idaho cobalt belt, USA: for domestic critical mineral,” Geology (2023) doi:10.1130/G51160.1
  • G.G. Jang, A. Ladshaw, J.K. Keum, J.A. Thompson, P. Zhang and C. Tsouris, “Continuous recovery of phosphoric acid and rare-earths containing particles from phosphoric acid sludge using a decanter centrifuge,” Chemical Engineering Journal (2023) doi:10.1016/j.cej.2023.141418 
  • K. Jayanthi, G. Neilsen, A. Gibson, A. Navrotsky and B.F. Woodfield, “Role of anions in stabilizing the [Zn-Al] layered double hydroxides: a thermodynamic study,” Journal of Physical Chemistry C (2023) doi:10.1021/acs.jpcc.2c08217 
  • S. Kulkarni, F. Zhao, I. Nlebedim, R. Fredette and M.P. Paranthaman, “Comparative life cycle assessment of injection molded and Big Area Additive Manufactured NdFeB bonded permanent magnets,” ASME Journal of Manufacturing Science and Engineering (2023) doi:10.1115/1.4056489
  • X.B. Liu, K. Gandha, H. Wang, K. Mungale, U. Kumar Vaidya, I.C. Nlebedim and M.P. Paranthaman, “Packing bimodal magnetic particles to fabricate highly dense anisotropic rare earth bonded permanent magnets,” RSC Adv. (2023) doi:10.1039/D3RA02349D
  • X.B. Liu and I.C. Nlebedim, “Phase stability and coercivity in La2Fe14B magnet,” AIP Advances (2023) doi:10.1063/9.0000403 
  • J.A. Mattocks, J.J. Jung, C-Y Lin, Z. Dong, N.H. Yennawar, E.R. Featherston, C.S. Kang-Yun, T.A. Hamilton, D.M. Park, A.K. Boal and J.A. Cotruvo, Jr., “Enhanced rare-earth separation with a metal-sensitive lanmodulin dimerand,” Nature (2023) doi:10.1038/s41586-023-05945-5
  • J. Mohapatra, X. Liu, P. Joshi and J. Ping Liu, “Hard and semi-hard Fe-based magnetic materials,” J. of Alloys and Comp. (2023) doi:10.1016/j.jallcom.2023.170258 
  • J.P.J. Prioli, S.Y. Liu, Y.F. Shen, V.T. Huynh, J.L. Rickli, H-J Yang, S.H. Kim and K.Y. Kim, “Empirical study for human engagement in collaborative robot programming,” J of Integrated Design and Process Science (2023) doi:10.3233/JID-221012 
  • M.H. Severson, R.T. Nguyen, J. Ormerod and S. Williams, “An integrated supply chain analysis for cobalt and rare earth elements under global electrification and constrained resources,” Resources, Conservation and Recycling (2023) doi:10.1016/j.resconrec.2022.106761
  • M.L. Whittaker, W.M. Dong, K. Li, T. Aytug, S.F. Evans, H.M. Meyer III, B.A. Moyer and M.P. Paranthaman, “Cooperative lithium sorption in doped layered double hydroxides is modulated by colloidal (dis)assembly,” Chemistry of Materials (May 3, 2023) doi:10.1021/acs.chemmater.3c00072

2022

  • C. Bhandhari and D. Paudyal, “Enhancing stability and magnetism of ThMn12-type cerium-iron intermetallics by site substitution,” Physical Review Research (2022) doi:10.1103/PhysRevResearch.4.023012
  • B.Z. Cui, X.B. Liu, C.I. Nlebedim and J. Cui, “Mechanically strengthened heterogeneous SmCo sintered magnets,” J of Alloys and Compounds (2022) doi:10.1016.j.jallcom.2022.163937
  • J. Cui, J. Ormerod, D. Parker, R. Ott, A. Palasyuk, S. McCall, M.P. Paranthaman, M. Kesler, M. McGuire, I.C. Nlebedim, C.C. Pan and T. Lograsso, “Manufacturing processes for permanent magnets: Part 1-sintering and casting,” JOM (2022) doi:10.1007/s11837-022-05156-9
  • Y. Fujita, D. Park, M. Lencka, A.Anderko, D. Reed,V.Thompson, G. Das, A. Eslamimanesh and Y. Jiao, “Beneficiation of REE: Prospects for Biotechnology Deployment,” Earth and Space Science Open Archive, 52. https://www.essoar.org/doi/abs/10.1002/essoar.10510876.1
  • Y.J. Fujita, S.K. McCall and D. Ginosar, “Recycling rare earths: perspectives and recent advances,” MRS Bulletin (2022) doi:10.1557/s43577-022-00301-2
  • M.S. Guzman, D. Reed, Y. Fujita, Y.Q. Jiao and D.M. Park, “Complete genome sequence of Acidithiobacillus ferriphilus GT2, isolated from gold mill tailings,” Microbiology Resource Announcements (2022) doi:10.1128/mra.01089-21
  • G. Inman, I.C. Nlebedim and D. Prodius, “Application of ionic liquids for the recycling and recovery of technologically critical and valuable metals,” Energies 2022 (2022) doi:10.3390/en15020628
  • K. Jayanthi, G. Neilsen, P.F. Rosen, C.I. Anderson, M.S. Dickson, S.F. Evans, M.P. Paranthaman, B.F. Woodfield and A. Navrotsky,“Cryogenic heat capacity measurements and thermodynamic analysis of lithium aluminum layered double hydroxides (LDHs) with intercalated chloride,” American Mineralogist (2022) doi:10.2138/am-2021-7935
  • J. Jesenovec, C. Pansegrau, M.D. McCluskey, J.S. McCloy, T.D. Gustafson, L.E. Halliburton and J.B. Varley, “Persistent room-temperature photodarkening in Cu-doped beta-Ga2O3,” Physical Review Letters (Feb 2022) doi:10.1103/PhysRevLett.128.077402
  • V. Kashyap and P. Taylor, “Extraction and recovery of zinc and indium from residue rich in zinc ferrite,” Minerals Engineering (2022) doi:10.1016/j.mineng.2021.107364
  • W.M. Kiarie, K. Gandha and D.C. Jiles, “Temperature-dependent magnetic properties of magnetorheological elastomers,” in IEEE Transactions on Magnetics, vol. 58, no. 2, pp. 1-5, Feb. 2022,Art no. 4000705, doi:10.1109/TMAG.2021.3082302.
  • A. Langorgren, C. Zimmermann, Y.K. Frodason, E.F.Verhoeven, P.M. Weiser, R.M. Karsthof, J.B.Varley and L.Vines,“Influence of heat treatments in H-2 and Ar on the E-1 center in beta-Ga2O3,” J of Applied Physics (2022) doi:10.1063/5.0083861
  • Y.Z. Li, V. Ambrogi, P. Cerruti, M. Goswami, Z. Yang, M.R. Kessler and O. Rios, “Functional liquid crystalline epoxy networks and composites: from materials design to applications,” International Materials Reviews (2022) doi:10.1080/09506608.2021.1937811 
  • S. Mu, M. Wang, J.B. Varley, J.L. Lyons, D. Wickramaratne and C.G. Van deWalle,“Role of carbon and hydrogen in limiting n-type doping of monoclinic (AlxGa1-2) 2O3, Physical Review B (April 2022) doi:10.1103/PhysRevB.105.155201
  • M. Shi, S.M. Reich, A.Verma, J.R. Klaehn, L.A. Diaz and T.E. Lister,“Extraction of nickel from recycled lithium-ion batteries,” Minerals Metals & Materials Series, page 163-172, doi:10.1007/978-3-030-92563-5_18
  • Z.C. Sims, H.B. Henderson, M.J. Thompson, R.P. Chaudhary, J.A. Hammons, J. Ilavsky, D. Weiss, K. Anderson, R. Ott and O. Rios, “Application of Ce for scavenging Cu impurities in A356 Al alloys,” European Journal of Materials (2022) doi:10.1080/26889277.2021.1974801
  • B.M. Su, X.Y. Ke and C. Yuan, “Modeling the effects of state of charge and temperature on calendar capacity loss of nickel-manganese-cobalt lithium-ion batteries,” J of Energy Storage (2022) doi:10.1016/j.est.2022.104105
  • C. Stetson, D. Prodius, H. Lee, C. Orme, B. White, H. Rollins, D. Ginosar, I.C. Nlebedim and A.D. Wilson, “Solvent-driven fractional crystallization for atom-efficient separation of metal salts from permanent magnet leachates,” Nature Communications (2022) doi:10.1038/s41467-022-31499-7
  • H. Ucar, D. Paudyal and K. Choudhary, “Machine learning predicted magnetic entropy change using chemical descriptors across a large compositional landscape,” Computational Materials Science (2022) doi:10.1016/j.commatsci.2022.111414
  • S.H.Yang, A.Anderko, R.E. Riman and A. Navrotsky,“Thermochemistry of stoichiometric rare earth oxyfluorides REOF,” J of the American Ceramic Society (2022) doi:10.1111/jace.18429
     

2021

  • Y.K. Frodason, C. Zimmermann, E.F. Verhoeven, P.M.Weiser, L. Vines and J.B. Varley, “Multistability of isolated and hydrogenated Ga-O divacancies in beta-Ga2O3,” Physical Review Materials (2021) doi:10.1103/PhysRevMaterials.5.025402 
  • X.B. Liu, M.S. Kesler, M.F. Besser, M.J. Kramer, M.A. McGuire and I.C. Nlebedim, “Effect of processing hydrogen pressure on magnetic properties of HDDR Nd-Fe-B magnet,” IEEE Transactions on Magnetics (2021) doi:10.1109/TMAG.2020.3022739 
  • R.T. Nguyen, R.G. Eggert, M.H. Severson and C.G. Anderson, "Global electrification of vehicles and intertwined material supply chains of cobalt, copper and nickel," Resour. Conserv. Recycl. (2021) doi:10.1016/j.resconrec.2020.105198. 
  • J.E.N. Swallow, R.G. Palgrave, P.A.E. Murgatroyd, A. Regoutz, M. Lorenz, A. Hassa, M. Grundmann, H. von Wenckstern, J.B. Varley and T.D. Veal, “Indium gallium oxide alloys: electrical structure, optical gap, surface space charge, and chemical trends within common-cation semiconductors," ACS Applied Materials & Interfaces (2021) doi:10.1021/acsami.0c16021
  • B.P. Thapaliya, H. Luo, P. Halstenberg, H.M. Meyer III, J.R. Dunlap and S. Dai, “Low-cost transformation of biomass-derived carbon to high-performing nano-graphite via low-temperature electrochemical graphitization,” ACS Appl. Mater. Interfaces (2021) doi:10.1021/acsami.0c19395.
  • L. Yin, R. Juneja, L. Lindsay, T. Pandey and D.S. Parker, “Semihard iron-based permanent-magnet materials,” Physical Review Applied (2021) doi:10.1103/PhysRevApplied.15.024012

2020

  • E. E. Moore, P.E.A. Turchi, V. Lordi, D. Weiss, Z.C. Sims, H.B. Henderson, M.S. Kesler, O. Rios, S.K. McCall and A. Perron, “Thermodynamic modeling of the Al-Ce-Cu-Mg-Si system and its application to aluminum-cerium alloy design,” J of Phase Equilibria & Diffusion (2020) doi:10.1007/s11669-020-00852-y 
  • J.A. Mattocks and J.A. Cotruvo, Jr., “Biological, biomolecular, and bio-inspired strategies for detection, extraction and separations of lanthanides and actinides,” Chemical Society Reviews (2020) doi:10.1039/d0cs00653j 
  • K. Gandha, X.B. Lui, W. Tang and I.C. Nlebedim, “Enhancement in hard magnetic properties of (Nd, Pr)-Fe-B melt-spun ribbons,” J of Applied Physics (2020) doi: 10.1063/5.0021135
  • G.G. Jang, A. Ladshaw, J.K. Keum, P. Zhang and C. Tsouris, “Continuous-flow centrifugal solid/liquid separation for the recovery of rare-earth elements containing particles from phosphoric acid sludge,” Industrial & Engineering Chemistry Research (2020) doi:10.1021.acs.iecr.0c04128
  • A. Karjalainen, V. Prozheeva, K. Simula, I. Makkonen, V. Callewaert, J.B. Varley and F. Tuomisto, “Split Ga vacancies and the unusually strong anisotropy of positron annihilation spectra in beta-Ga2O3,” Physical Review B (2020) doi:10.1103/PhysRevB.102.19207
  • R.A. Osborne, N.J. Cherepy, Z.M. Seeley, S.A. Payne, A.D. Drobshoff, A.M. Srivastava, W.W. Beers, W.W. Cohen and D.L. Schlagel, “New red phosphor ceramic K2 SiF6:Mn4+,” Optical Materials (2020) doi:10.1016/j.optmat.2020.110140
  • B.J. Watson and R.G. Eggert, “Understanding relative metal prices and availability: combining physical and economic perspectives,” J of Industrial Ecology (2020) doi:10.1111/jiec.13087
  • S. Yang, M. Powell, J. W. Kolis and A. Navrotsky, “Thermochemistry of rare earth oxyhydroxides, REOOH (RE = Eu to Lu),” J of Solid State Chemistry (2020) doi:10.1016/j.jssc.2020.121344
  • R. Choudhary, A. Palasyuk, I.C. Nlebedim, R.T. Ott, and D. Paudyal, “Atomic cooperation in enhancing magnetism: (Fe, Cu)-doped CeCo5,” J of Alloys and Compounds (2020) doi:10.1016/j.jallcom.2020.155549
  • S. Deng, X. Zhou, A. Huang, Y. Yih and J.W. Sutherland, “Evaluating economic opportunities for product recovery via the Sherwood principle and machine learning," Resources, Conservation & Recycling (2020) doi:10.1016/j.resconrec.2020.105232 
  • B. Ensign, R. Choudhary, H. Ucar and D. Paudyal, “Electronic structure, magnetic properties, and exchange splitting of gadolinium intermetallics,” JOM (2020) doi:10.1016/j.jmmm.2020.166882 
  • J.E. Aston, V. S. Thompson, Y. Fujita, Y. Jiao and D.W. Reed. “Application of metabolic flux modeling to predict carbon flow and optimize the production of chelating acids by Gluconobacter oxydans for bioleaching of rare earth elements.” Proc. XXX Intern. Miner. Process. Congr. (IMPC 2020).
  • P. Bagri, B. P. Thapaliya, Z. Yang, W. Jiang, D. Sulejmanovic, H. Luo and S. Dai; “Electrochemically induced crystallization of amorphous materials in molten MgCl2: Boron nitride and hard carbon,” Chem. Comm. (2020) doi:10.1039/c9cc08717f
  • E. Chang, A. Brewer, D.M. Park, Y. Jiao and L.N. Lammers, “Surface complexation model of rare earth element adsorption onto bacterial surfaces with lanthanide binding tags” Applied Geochemistry (2020) doi:10.1016/j.apgeochem.2019.104478 
  • R. Choudhary, A. Kashyap, D. Paudyal, D. Sellmyer and R. Skomski, “Non-Heisenberg magnetism in a quaternary spin-gapless semiconductor,” JOM (2020) doi:10.1016/j.jmmm.2019.166058 
  •  C.L. Cramer, T.G. Aguirre, N.R. Wieber, R.A. Lowden, A. Trofimov, H. Wang, J. Yan, M.P. Paranthaman and A.M. Elliott, “Binder jet printed WC infiltrated with pre-made melt of WC and Co,” Int J of Refractory Metals and Hard Materials (2020) doi:10.1016/j.ijrmhm.2019.105137
  • V. Deshmane, S.Z. Islam and R.R. Bhave, “Selective recovery of rare earth elements from a wide range of e-waste and process scalability of membrane solvent extraction,” Env. Sci. & Tech. (2020) doi:10.1021/acs.est.9b05695
  • Y.K. Frodason, K.M. Johansen, L. Vines and J.B. Varley, “Self-trapped hole and impurity-related broad luminescence in beta-Ga2O3,” J of Applied Physics (2020) doi:10.1063/1.5140742
  • H. Henderson, D. Weiss, Z. Sims, E. Moore, A. Perron, F. Meng, R. Ott, O. Rios, “Ternary interactions and implications for third element alloying potency in Al-Ce-based alloys,” In: Tomsett A. (eds) Light Metals 2020. The Minerals, Metals & Materials Series. Springer, Cham. https://doi.org/10.1007/978-3-030-36408-3_32
  • R. Olmos, H. Iturriaga, D.S. Blazer, S. Koohfar, K. Gandha, I.C. Nlebedim, D.P. Kumah and S.R. Singamaneni, “Exchange bias in La0.7Sr0.3CrO3/La0.7Sr0.3MnO3)/La0.7Sr0.3CrO3 heterostructures,” AIP Advances (2020) doi:10.1063/1.5130453  
  • T.N. Lamichhane, V. Taufour, A. Palasyuk, S. Bud’ko and P. Canfield, “Study of the ferromagnetic quantum phase transition in Ce3-xMgxCo9,” Philosophical Magazine (2020) doi:10.1080/14786435.2020.1727973Z
  • T. Pandey and David S. Parker, “Potential high-performance magnet: Fe and Zr-alloyed Ce2Co17,” Physical Review Applied (2020) doi:10.1103/PhysRevApplied.13.034039
  • B.S. Ram, A.P.S. Baghel, S.V. Kulkarni, L. Daniel and I.C. Nlebedim, “A frequency-dependent scalar magneto-elastic hysteresis model derived using multi-scale and Jiles-Atherton approaches,” IEEE Transactions on Magnetics (2020) doi:10.1109/TMAG.2019.2950751
  • M. Saleh, J. Varley, J. Jesenovec, A. Bhattacharyya, S. Krishnamoorthy, S. Swain and K. Lynn, “Degenerate doping in β-Ga2O3 single crystals through Hf-doping,” Semiconductor Science and Technology (2020) doi:10.1088/1361-6641/ab75a6
  •  Z. Sims, D. Weiss, O. Rios, H. Henderson, M. Kesler, S. McCall, M. Thompson, A. Perron and E. Moore, “The efficacy of replacing metallic cerium in aluminum-cerium alloys with LREE mischmetal” In: Tomsett A. (eds) Light Metals 2020. The Minerals, Metals & Materials Series. Springer, Cham. doi:10.1007/978-3-030-36408-3_30
  • J.E. Sutton, S. Roy, A.U. Chowdhury, L. Wu, A.K. Wanhala, N. De Silva, S. Jansone-Popova, B.P. Hay, M.C. Cheshire, T.L. Windus, A.G. Stack, A. Navrotsky, B.A. Moyer, B. Doughty and V.S. Bryantsev, “Molecular recognition at mineral interfaces: Implications for the beneficiation of rare earth ores.” ACS Applied Materials & Interfaces (2020) doi:10.1021/acsami.9b22902
  • V. Vaccarezza and C. Anderson, “An overview of beneficiation and hydrometallurgical techniques on Eudialyte Group Minerals,” Mining Metallurgy & Exploration (2020) doi:10.1007/s42461-019-00132-5
  • C. Zimmermann, Y.K. Frodason, A.W. Barnard, J.B. Varley, K. Irmscher, Z. Galazka, A. Karjalainen, W.E. Meyer, F.D. Auret and L. Vines, “Ti- and Fe-related charge transition levels in beta-Ga2O3, Applied Physics Letters (2020) doi:10.1063/1.5139402

2019

  • R.T. Nguyen, D.D. Imholte, A.C. Matthews and W.D. Swank, “NdFeB content in ancillary motors of US conventional passenger cars and light trucks: Results from the field,” Waste Management (2019) doi:10.1016/j.wasman.2018.11.107 
  • G. Das, M.M. Lencka, A. Eslamimanesh, P. Wang, A. Anderko, R.E. Riman and A. Navrotsky, “Rare earth sulfates in aqueous systems: Thermodynamic modeling of binary and multicompontent systems in wide concentration and temperature ranges,” J. Chem. Thermodyn. (2019) doi:10.1016/j.jct.2018.10.020
  • B. Shen, C. Yu, A.A. Baker, S.K. McCall, Y. Yu, D. Su, Z. Yin, H. Liu, J. Li and S. Sun, “Chemical synthesis of magnetically hard and strong rare earth metal based nanomagnets,” Angewandte Chemi-International Edition (2019) doi:10.1002/anie.201812007 
  • T.N. Lamichhane, M.T. Onyszczak, O. Palasyuk, S. Sharikadze, T-H Kim, Q. Lin, M.J. Kramer, R.W. McCallum, A.L. Wysocki, M.C. Nguyen, V.P. Antropov, T. Pandey, D.S. Parker, S.L. Bud’ko, P.C. Canfield and A. Palasyuk, “Single-crystal permanent magnets: Extraordinary magnetic behavior in the Ta-, Cu-, and Fe-substituted CeCo5 systems,” Phys Rev Applied (2019) doi: 10.1103/PhysRevApplied.11.014052 
  • X. Shen, Y. Xia, G. Wang, F. Zhou, V. Ozolins, X. Lu, G. Wang and X. Zhou, “High thermoelectric performance in complex phosphides enabled by stereochemically active lone pair electrons,” J Mat. Chem. A (2019) doi:10.1039/c8ta90286k 
  • H.A. Khazdozian, L. Li, M.P. Paranthaman, S.K. McCall, M.J. Kramer and I.C. Nlebedim, “Low field alignment of anisotropic bonded magnets for additive manufacturing of permanent magnet motors,” JOM (2019) doi:10.1007/s1837-018-3242-0 
  • Y. Xia, J. Park, F. Zhou and V. Ozolins, “High thermoelectric power factor in intermetallic CoSi arising from energy filtering of electrons by phonon scattering,” Phys Rev Applied (2019) doi:10.1103/PhysRevApplied.11.024017 
  • H. Jin, B.D. Song, Y. Yih and J.W. Sutherland, “A bi-objective network design for value recovery of neodymium-iron-boron magnets: A case study of the United States,” J of Cleaner Production (2019) doi:10.1016/j.jclepro.2018.11.101 
  • D.G. Ballance, V.S. Bryantsev, A.S. Ivanov, S. Dai and R.D. Hancock, “Complexation of lanthanides and other metal ions by the polypyridyl ligand quaterpyridine: relation between metal ion size, chelate ring size, and complex stability,” Inorganica Chimica Acta (2019) doi:10.1016/j.ica.2018.12.050 
  • P.J Antonick, Z. Hu, Y. Fujita, D.W. Reed, G. Das, L. Wu, R. Shivaramaiah, P. Kim, A. Eslamimanesh, M.M. Lencka, Y. Jiao, A. Anderko, A. Navrotsky and R.E. Riman, “Bio- and mineral acid leaching of rare earth elements from synthetic phosphogypsum,” J. Chem. Thermodyn. (2019) doi:10.1016/j.jct.2018.12.034 
  • M.E. Ingebrigtsen, A. Yu. Kuznetsov, B.G. Svensson, G. Alfieri, A. Mihaila, U. Badstubner, A. Perron, L. Vines and J.B. Varley, “Impact of proton irradiation on conductivity and deep level defects in β-Ga2O3,” APL Materials (2019) doi:10.1063/1.5054826 
  • H. Peelaers, J.L. Lyons, J.B. Varley and C.G. Van de Walle, “Deep acceptors and their diffusion in Ga2O3,” APL Materials (2019) doi:10.1063/1.5063807 
  • J.E.N. Swallow, J.B. Varley, L.A.H. Jones, J.T. Gibbon, L.F.J. Piper, V.R. Dhanak and T.D. Veal, “Transition from electron accumulation to depletion at beta-Ga203 surfaces: The role of hydrogen and the charge neutrality level,” APL Materials (2019) doi:10.1063/1.5054091 
  • M.T. Onyszczak, T.N. Lamichhane, S.L. Bud'ko, P.C. Canfield and A. Palasyuk “Structural and magnetic properties of the CeCo5 –CeZn5 solid solution and potential improvements upon iron substitution,” J. Magn. Magn. Mater. (2019) doi:10.1016/j.jmmm.2019.03.024 
  • R.T. Nguyen, D.D. Imholte, O.R. Rios, D.Weiss, Z.Sims, E. Stromme and S.K. McCall, “Anticipating impacts of introducing aluminum-cerium alloys into the United States automotive market,” Resources Conservation and Recycling (2019) doi:10.1016/j.resconrec.2019.02.009 
  • T. Fishman and T.E. Graedel, “Impact of the establishment of U.S. offshore wind power on neodymium flows,” Nature Sustainability (2019) doi:10.1038/s41893-019-0252-z 
  • T.N. Lamichhane, Q. Lin, V. Taufour, A. Palasyuk, T. Pandey, D. Parker, S.L. Bud’ko and P.C. Canfield, “Mg assisted flux growth and characterization of single crystalline Sm2Co17,” AIP Advances (2019) doi:10.1063/1.5080117
  • L. Wu, L. Li, S.F. Evans, T.A. Eskander, B.A. Moyer, Z. Hu, S. Harrison, M.P. Paranthaman, R. Riman and A. Navrotsky, “Lithium aluminum layered double hydroxide Chlorides (LDH): Formation enthalpies and energetics of lithium ion capture,” J. Amer. Ceram. Soc. (2019) doi:10.1111/jace.16150
  • J.P. Laurino, J. Mustacato, Z. Huba and P. Zhang, “The Recovery of Rare Earth Elements from Phosphate Rock and Phosphate Mining Waste Products using a Novel Heterogeneous Adsorption Polymer,” Beneficiation of Phosphates: Sustainability, Critical Materials, Smart Processes (2019) Society for Mining, Metallurgy & Exploration, Englewood, Colorado.
  • Healy, M. R.; Ivanov, A. S.; Karslyan, Y.; Bryanstev, V. S.; Moyer, B. A.; Jansone-Popova, S. “Efficient Separation of Light Lanthanides(III) Using bis-Lactam Pheanthroline Ligands” Chemistry – A European Journal (2019) doi:10.1002/chem.201806443.  
  • D. Weiss, “Improved High-Temperature Aluminum Alloys Containing Cerium,” J Materi Eng and Perform (2019) doi.org/10.1007/s11665-019-3884-2
  • D. Weiss, “Developments in Aluminum-Scandium-Ceramic and Aluminum-Scandium-Cerium Alloys,” (2019) In: C. Chesonis (eds) Light Metals 2019. The Minerals, Metals & Materials Series. Springer, Cham
  • H.A. Khazdozian, L. Li, M.P. Paranthaman, S.K. McCall, M.J. Kramer and I.C. Nlebedim, “Low Field Alignment of Anisotropic Bonded Magnets for Additive Manufacturing of Permanent Magnet Motors,” JOM (2019) doi:10.1007/s11837-018-3242-0
  • K. Gandha, G. Ouyang, S. Gupta, M.P. Paranthaman and I.C. Nlebedim, “Recycling of additively printed rare earth bonded magnets,” Waste Management  (2019) doi:10.1016/j.wasman.2019.04.040 
  • I.C. Nlebedim, M. Huang, K. Sun, L. Zhou, R.W. McCallum and M.J. Kramer, “Microstructure and Magnetic Properties of Grain Refined Pr2Co14B Melt-Spun Ribbons,” Magnetochemistry (2019) doi:10.3390/magnetochemistry5010006 
  • M.S. Kesler, B.A. Jensen, L. Zhou, O. Palasyuk, T-H Kim, M.J. Kramer, I.C. Nlebedim, O. Rios and M.A. McGuire, “Effects of High Magnetic Fields on Phase Transformations in Amorphous Nd2Fe14B,” Magnetochemistry (2019) doi:10.3390/magnetochemistry5010016