Leadership

Alert
COVID-19 Updates and Resources COVID-19 Updates and Resources

Ames Laboratory is a government-owned, contractor-operated national laboratory of the U.S. Department of Energy (DOE), operated by and located on the campus of Iowa State University in Ames, Iowa. For over 70 years, the Ames Laboratory has successfully partnered with Iowa State University, and is unique among the DOE laboratories in that it is physically located on the campus of a major research university. 

Many of the scientists and administrators at the Laboratory also hold faculty positions at the University and the Laboratory has access to both undergraduate and graduate student talent. 

Click on the names below to read more about our leadership team:

Adam Schwartz, Director

Adam SchwartzAdam Schwartz became Director of Ames Laboratory in 2014. He is also a professor of Materials Science and Engineering in the College of Engineering at Iowa State University.

 

Prior to joining Ames Laboratory in 2014, Schwartz had nearly 23 years of materials science research and management experience at Lawrence Livermore National Laboratory in Livermore, CA that spanned physical metallurgy to condensed matter physics with a particular focus on phase transformations, phase stability, and electronic structure of actinides and lanthanides. He held leadership positions for Plutonium Aging, Dynamic Properties of Materials, and Physics and Engineering Models programs.

 

He led the Lawrence Livermore National Laboratory team during the development of the Critical Materials Energy Innovation Hub and then continued on as the Developing Substitutes Focus Area Leader. In this role, he leveraged his expertise in metallurgy, condensed matter physics, and technical management to drive the innovation of substitute materials. The Energy Innovation Hub, known as the Critical Materials Institute, is led by Ames Laboratory.

 

Schwartz has authored over 100 journal articles, monographs, book chapters, technical reports and co-edited two editions of Electron Backscatter Diffraction in Materials Science. Schwartz holds B.S. and M.S. degrees in Metallurgical Engineering and a Ph.D. degree in Materials Science and Engineering, all from the University of Pittsburgh.

Thomas Lograsso, Deputy Director

Tom LograssoThomas Lograsso was named Deputy Director of Ames Laboratory in 2013 and served as Interim Laboratory Director prior to the hiring of Adam Schwartz as Director in 2014.

 

Lograsso has been a research scientist at the Ames Laboratory since 1988. He is also serving as interim director of the Critical Materials Institute, a DOE Energy Innovation Hub led by Ames Laboratory. Lograsso’s research interests include solid-liquid phase equilibria, solid-solid phase interactions, quasicrystalline alloys, kinetics of phase transitions, and synthesis of single crystals of intermetallics, magneto-responsive alloys and compounds.  

 

Lograsso received his B.S., M.S. and Ph.D. degrees in Metallurgical Engineering from Michigan Technological University.

James Morris, Chief Research Officer

James MorrisJames Morris became Ames Laboratory’s Chief Research Officer in June 2019. As Chief Research Officer (CRO), Morris is responsible for initiating, developing and supervising the Ames Laboratory’s scientific divisions, institutes and programs. The CRO formulates and evaluates new initiatives in support of Ames Laboratory’s mission – to create materials, inspire minds to solve problems, and address global challenges – often emphasizing cross-disciplinary collaborations with other DOE National Laboratories, academia, and industry.

 

 Morris’ research has focused on a variety of materials science challenges, including alloy design, high entropy alloys, metallic liquids and glasses, and hydrogen storage and other confined fluids in porous media. He earned his B.S. in physics at Colorado State University in 1987, and his Ph.D. in theoretical physics from Cornell University in 1992.  He worked at Ames Laboratory, a Department of Energy (DOE) Laboratory located on the Iowa State University, first as a postdoctoral associate then as a scientific staff member.  In 2003, he joined the Alloy Behavior and Design group at Oak Ridge National Lab (ORNL), and in 2005 also became joint faculty with the University of Tennessee’s Materials Science and Engineering department.  At ORNL, Morris served as Deputy Director for the DOE Energy Frontier Research Center for Defect Physics, as Lab Coordinator for the Basic Energy Sciences - Materials Science and Engineering program, and as Materials Theory Group Leader. 

Steve Hamilton, Chief Operations Officer

Steve HamiltonSteve Hamilton joined Ames Laboratory as Chief Operations Officer in August 2019. Prior to coming to Ames Laboratory, Hamilton was the Vice President of Operations at Kratos Real Time Logic, Inc., an engineering company in Colorado. He has also held numerous other operations leadership positions in military and commercial organizations.

 

As the manager of most operational business functions of the Laboratory, Hamilton is crucial to the Laboratory’s operational excellence, efficiency, and agility, including administration of the contract between the Department of Energy and Iowa State University to run Ames Lab.

 

Hamilton received his B.S. in Industrial Technology from Southern Illinois University-Carbondale,  M.S. in Industrial Management from Central Missouri State University and M.A. in Organizational Management from George Washington University.

Andrea Spiker, Performance Management Director

Andrea SpikerAndrea Spiker has been Director of Ames Laboratory’s Performance Management since 2017. Prior to that, she served as the Lab’s Procurement and Property manager.

 

As Performance Management director, Spiker and her staff work collectively to improve organizational effectiveness to achieve the Lab’s mission and goals. The Performance Management team works to enhance the Laboratory’s Quality Assurance, Contractor Assurance, Learning and Development, Assessments, and Documents and Records. Performance Management focuses on ensuring Laboratory compliance, improves training throughout the Laboratory, develops Laboratory-wide awareness for Quality Assurance, and establishes Laboratory performance indicators and metrics to emphasize how we are fulfilling and supporting the DOE mission.

 

Spiker holds a B.A degree in Corporate Communications from Simpson College and an MBA with specialization in Supply Chain Management from Iowa State University.

 

Julienne Krennrich, Innovations Partnerships Program Manager

Julienne KrennrichJulienne Krennrich joined Ames Laboratory as Innovation Partnerships Program manager in June 2018. She previously worked for Iowa State University as Assistant Director of the Engineering Research Institute which gave her broad program management experience, including negotiation of complex awards and contracts. She also worked extensively with federal and industry partners to advance strategic research and commercialization goals.

 

As IPP Manager, Krennrich leads her team in developing, enhancing, and maintaining long-term strategic partnerships with industrial sponsors and partners. She also serves as the Laboratory’s Technology Transition Officer, represents the Laboratory at DOE and as part of the National Laboratory Technology Transfer (NLTT) executive group, the Technology Transfer Working Group (TTWG), and the Federal Laboratory Consortium.

 

Krennrich earned a PhD from ISU in Experimental Condensed Matter Physics with an emphasis on the electromagnetic properties of strongly correlated electron systems, particularly those found in some classes of high temperature superconductors. She also holds an MBA in Finance from ISU.

Thomas Lograsso, Critical Materials Institute Interim Director

Tom LograssoThomas Lograsso has served as Interim Director of the Critical Materials Institute (CMI), a DOE Energy Innovation Hub led by Ames Laboratory, since November 2019. 

 

Lograsso’s research interests include solid-liquid phase equilibria, solid-solid phase interactions, quasicrystalline alloys, kinetics of phase transitions, and synthesis of single crystals of intermetallics, magneto-responsive alloys and compounds. He is also the Developing Substitutes Focus Area Leader at CMI.

 

Lograsso received his B.S., M.S. and Ph.D. degrees in Metallurgical Engineering from Michigan Technological University.

Matthew Kramer, Division Director, Materials Sciences and Engineering

Matt KramerMatthew Kramer has been Division Director for Materials Sciences and Engineering (DMSE) since 2014. He is also an adjunct professor of Materials Science and Engineering at Iowa State University.

 

As DMSE director, Kramer oversees budgets, proposal preparation, Materials Preparation Center administration, and Sensitive Instrument Facility oversight. DMSE includes 13 FWPs (BES funded), EFRC CATS, approximately 13 additional DOE funded projects, and a small number of Strategic Partnership Projects.

 

Kramer joined Ames Laboratory in 1988, specializing in the areas Structure and properties of glass forming metallic alloys, aperiodic intermetallic alloys, permanent magnets and high temperature alloys, development of in situ time resolved methods using electron microscopy and high energy X-ray diffraction, analytical electron microscopy, and advanced imaging techniques for understanding rapid solidification.  He holds B.S. and M.S degrees in geo mechanics and geology from the University of Rochester and a Ph.D. in geology from Iowa State University.

Theresa Windus, Interim Division Director, Chemical and Biological Sciences

Theresa WindusTheresa Windus has many years of experience as a Department of Energy scientist, both here and previously at Pacific Northwest National Laboratory, as well as at her faculty appointment at Iowa State’s Department of Chemistry. In recent years she has been named a Distinguished Professor in the College of Liberal Arts and Sciences (2018), and AAAS Fellow (2017). Her research is centered upon developing new methods and algorithms that will lead computational chemistry into the future of exascale computing. 

She received her B.A. in Chemistry, Mathematics and Computer Science from Minot State University and her Ph.D. in Physical Chemistry from Iowa State University.

 

Mark Bryden, Division Director, Simulation Modeling and Decision Science

Mark BrydenMark Bryden is the founding director of the Simulation, Modeling and Decision Science program at the Laboratory and is a professor of mechanical engineering at Iowa State University. Bryden’s research is focused on the federation of information from disparate sources (e.g., models, data, and other information elements) to create detailed models of engineered, human, and natural systems that enable engineering decision making for these complex systems.

 

Bryden has published more than 180 peer-reviewed articles and co-authored the textbook Combustion Engineering. He has founded two successful startups based on his research work, and he has founded the nonprofit ETHOS, a community of 150+ researchers focused on meeting the needs for clean village energy in the developing world. He has received three patents, three R&D 100 awards, two Regional Excellence in Technology Transfer awards, and a National Excellence in Technology Transfer award. In 2013 he and his coauthors received the ASME Melville Medal. 

 

Bryden received his BS, General Engineering, Idaho State University,  and his MS and PhD in Mechanical Engineering, University of Wisconsin-Madison.