You are here

Publications

Found 15 results
Filters: Keyword is &  [Clear All Filters]
2018
B. Feng, Levitas, V. I., and Kamrani, M., Coupled strain-induced alpha to omega phase transformation and plastic flow in zirconium under high pressure torsion in a rotational diamond anvil cell, Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, vol. 731, pp. 623-633, 2018.
Y. Sun, Zhang, F., Yang, L., Ye, Z., Song, H. J., Mendelev, M. I., Wang, C. Z., and Ho, K. M., Effect of samarium doping on the nucleation of fcc-aluminum in undercooled liquids, Scripta Materialia, vol. 154, pp. 202-206, 2018.
V. I. Levitas, Effect of the ratio of two nanosize parameters on the phase transformations, Scripta Materialia, vol. 149, pp. 155-162, 2018.
Y. Liu, Yang, C. D., Liu, M., Wang, C. H., Dai, Y. C., Li, X., Russell, A. M., Zhang, C. X., Zhang, Z. H., and Cao, G. H., Effects of microstructure and crystallography on mechanical properties of cold-rolled SAE1078 pearlitic steel, Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, vol. 709, pp. 115-124, 2018.
V. Borovikov, Mendelev, M. I., and King, A. H., Solute effects on interfacial dislocation emission in nanomaterials: Nucleation site competition and neutralization, Scripta Materialia, vol. 154, pp. 12-15, 2018.
F. Zhang, Sun, Y., Wang, X. D., Cao, Q. P., Jiang, J. Z., Wang, C. Z., and Ho, K. M., Structural connection between gallium crystals and near-T-m liquids under ambient pressure, Scripta Materialia, vol. 143, pp. 86-89, 2018.
2017
L. Tian, Russell, A., Riedemann, T., Mueller, S., and Anderson, I., A deformation-processed Al-matrix/Ca-nanofilamentary composite with low density, high strength, and high conductivity, Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, vol. 690, pp. 348-354, 2017.
M. Liu, Wang, C. H., Dai, Y. C., Li, X., Cao, G. H., Russell, A. M., Liu, Y. H., Dong, X. M., and Zhang, Z. H., Effect of quenching and tempering process on sulfide stress cracking susceptibility in API-5CT-C110 casing steel, Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, vol. 688, pp. 378-387, 2017.
M. Kamrani, Levitas, V. I., and Feng, B., FEM simulation of large deformation of copper in the quasi-constrain high-pressure-torsion setup, Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, vol. 705, pp. 219-230, 2017.
M. Liu, Zhang, Z. X., Wang, S. Q., Cao, G. H., Russell, A. M., Liu, Y. H., Dong, X. M., Zhang, C. X., and Zhang, Z. H., Microstructure evolution and mechanical properties in 1Cr low alloy steel with different heat treatments, Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, vol. 705, pp. 291-299, 2017.
Q. G. Wang, Mao, D. P., Liu, P., Koschny, T., Soukoulis, C. M., and Dong, L., NEMS-Based Infrared Metamaterial via Tuning Nanocantilevers Within Complementary Split Ring Resonators, Journal of Microelectromechanical Systems, vol. 26, pp. 1371-1380, 2017.
J. T. Sypek, Weinberger, C. R., Vijayan, S., Aindow, M., Bud'ko, S. L., Canfield, P. C., and Lee, S. W., Superelastic and micaceous deformation in the intermetallic compound CaFe2As2, Scripta Materialia, vol. 141, pp. 10-14, 2017.
2016
D. A. H. Hanaor, Hu, L., Kan, W. H., Proust, G., Foley, M., Karaman, I., and Radovic, M., Compressive performance and crack propagation in Al alloy/Ti2AlC composites, Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, vol. 672, pp. 247-256, 2016.
M. Liu, Yang, C. D., Cao, G. H., Russell, A. M., Liu, Y. H., Dong, X. M., and Zhang, Z. H., Effect of microstructure and crystallography on sulfide stress cracking in API-5CT-C110 casing steel, Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, vol. 671, pp. 244-253, 2016.
E. Aydogan, Pal, S., Anderoglu, O., Maloy, S. A., Vogel, S. C., Odette, G. R., Lewandowski, J. J., Hoelzer, D. T., Anderson, I. E., and Rieken, J. R., Effect of tube processing methods on the texture and grain boundary characteristics of 14YWT nanostructured ferritic alloys, Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, vol. 661, pp. 222-232, 2016.