You are here

Publications

Found 24 results
Filters: Author is Kessler, M. R.  [Clear All Filters]
2014
R. Q. Chen, Zhang, C. Q., and Kessler, M. R., Anionic waterborne polyurethane dispersion from a bio-based ionic segment, Rsc Advances, vol. 4, pp. 35476-35483, 2014.
M. Thunga, Chen, K., Grewell, D., and Kessler, M. R., Bio-renewable precursor fibers from lignin/polylactide blends for conversion to carbon fibers, Carbon, vol. 68, pp. 159-166, 2014.
Y. Z. Li and Kessler, M. R., Cure kinetics of liquid crystalline epoxy resins based on biphenyl mesogen, Journal of Thermal Analysis and Calorimetry, vol. 117, pp. 481-488, 2014.
T. F. Garrison, Kessler, M. R., and Larock, R. C., Effects of unsaturation and different ring-opening methods on the properties of vegetable oil-based polyurethane coatings, Polymer, vol. 55, pp. 1004-1011, 2014.
M. Thunga, Bauer, A., Obusek, K., Meilunas, R., Akinc, M., and Kessler, M. R., Injection repair of carbon fiber/bismaleimide composite panels with bisphenol E cyanate ester resin, Composites Science and Technology, vol. 100, pp. 174-181, 2014.
V. K. Thakur, Grewell, D., Thunga, M., and Kessler, M. R., Novel Composites from Eco-Friendly Soy Flour/SBS Triblock Copolymer, Macromolecular Materials and Engineering, vol. 299, pp. 953-958, 2014.
H. Acar, Cinar, S., Thunga, M., Kessler, M. R., Hashemi, N., and Montazami, R., Study of Physically Transient Insulating Materials as a Potential Platform for Transient Electronics and Bioelectronics, Advanced Functional Materials, vol. 24, pp. 4135-4143, 2014.
M. Thunga, Akinc, M., and Kessler, M. R., Tailoring the toughness and CTE of high temperature bisphenol E cyanate ester (BECy) resin, Express Polymer Letters, vol. 8, pp. 336-344, 2014.
2013
A. Bauer, Thunga, M., Obusek, K., Akinc, M., and Kessler, M. R., Bisphenol E cyanate ester as a novel resin for repairing BMI/carbon fiber composites: Influence of cure temperature on adhesive bond strength, Polymer, vol. 54, pp. 3994-4002, 2013.
R. Hardis, Jessop, J. L. P., Peters, F. E., and Kessler, M. R., Cure kinetics characterization and monitoring of an epoxy resin using DSC, Raman spectroscopy, and DEA, Composites Part a-Applied Science and Manufacturing, vol. 49, pp. 100-108, 2013.
H. Y. Cui, Hanus, R., and Kessler, M. R., Degradation of ROMP-based bio-renewable polymers by UV radiation, Polymer Degradation and Stability, vol. 98, pp. 2357-2365, 2013.
X. Sheng, Hanus, R., Bauer, A., and Kessler, M. R., Effect of PEGDE addition on rheological and mechanical properties of bisphenol E cyanate ester, Journal of Applied Polymer Science, vol. 130, pp. 463-469, 2013.
Y. Z. Li and Kessler, M. R., Liquid crystalline epoxy resin based on biphenyl mesogen: Effect of magnetic field orientation during cure, Polymer, vol. 54, pp. 5741-5746, 2013.
Y. Z. Li, Badrinarayanan, P., and Kessler, M. R., Liquid crystalline epoxy resin based on biphenyl mesogen: Thermal characterization, Polymer, vol. 54, pp. 3017-3025, 2013.
M. Thunga, Larson, K., Lio, W., Weerasekera, T., Akinc, M., and Kessler, M. R., Low viscosity cyanate ester resin for the injection repair of hole-edge delaminations in bismaleimide/carbon fiber composites, Composites Part a-Applied Science and Manufacturing, vol. 52, pp. 31-37, 2013.
W. X. Sun, Sun, W. Z., Kessler, M. R., Bowler, N., Dennis, K. W., McCallum, R. W., Li, Q., and Tan, X. L., Multifunctional Properties of Cyanate Ester Composites with SiO2 Coated Fe3O4 Fillers, Interfaces, vol. 5, pp. 1636-1642, 2013.
D. Vennerberg, Quirino, R., and Kessler, M. R., A Novel Microwave-Assisted Carbothermic Route for the Production of Copper-Carbon Nanotube Metal Matrix Composites Directly from Copper Oxide, Advanced Engineering Materials, vol. 15, pp. 366-372, 2013.
S. A. Madbouly, Xia, Y., and Kessler, M. R., Rheological Behavior of Environmentally Friendly Castor Oil-Based Waterborne Polyurethane Dispersions, Macromolecules, vol. 46, pp. 4606-4616, 2013.
C. Q. Zhang, Xia, Y., Chen, R. Q., Huh, S., Johnston, P. A., and Kessler, M. R., Soy-castor oil based polyols prepared using a solvent-free and catalyst-free method and polyurethanes therefrom, Green Chemistry, vol. 15, pp. 1477-1484, 2013.
H. C. Wu, Rogalski, M., and Kessler, M. R., Zirconium Tungstate/Epoxy Nanocomposites: Effect of Nanoparticle Morphology and Negative Thermal Expansivity, Interfaces, vol. 5, pp. 9478-9487, 2013.