You are here

Publications

Found 38 results
Filters: Author is Anderson, I. E.  [Clear All Filters]
2017
M. C. Nguyen, Zhou, L., Tang, W., Kramer, M. J., Anderson, I. E., Wang, C. Z., and Ho, K. M., Cluster-Expansion Model for Complex Quinary Alloys: Application to Alnico Permanent Magnets, Physical Review Applied, vol. 8, p. 054016, 2017.
A. G. Kassen, White, E. M. H., Tang, W., Hu, L. F., Palasyuk, A., Zhou, L., and Anderson, I. E., Compression Molding and Novel Sintering Treatments for Alnico Type-8 Permanent Magnets in Near-Final Shape with Preferred Orientation, Jom, vol. 69, pp. 1706-1711, 2017.
R. Skomski, Ke, L. Q., Kramer, M. J., Anderson, I. E., Wang, C. Z., Zhang, W. Y., Shield, J. E., and Sellmyer, D. J., Cooperative and noncooperative magnetization reversal in alnicos, Aip Advances, vol. 7, p. 056222, 2017.
C. Czahor, Riedemann, T., Russell, A., and Anderson, I. E., DEFORMATION PROCESSED Al/Al2Ca NANO-FILAMENTARY COMPOSITE CONDUCTORS, International Journal of Powder Metallurgy, vol. 53, pp. 11-19, 2017.
C. F. Czahor, Anderson, I. E., Riedemann, T. M., Russell, A. M., and , Deformation processed Al/Ca nano-filamentary composite conductors for HVDC applications, 38th Riso International Symposium on Materials Science, vol. 219, 2017.
L. Tian, Russell, A., Riedemann, T., Mueller, S., and Anderson, I. E., A deformation-processed Al-matrix/Ca-nanofilamentary composite with low density, high strength, and high conductivity, Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, vol. 690, pp. 348-354, 2017.
I. E. Anderson, Kassen, A. G., White, E. M. H., Palasyuk, A., Zhou, L., Tang, W., and Kramer, M. J., Development of controlled solid-state alignment for alnico permanent magnets in near-final shape, Aip Advances, vol. 7, p. 056209, 2017.
E. Aydogan, Maloy, S. A., Anderoglu, O., Sun, C., Gigax, J. G., Shao, L., Garner, F. A., Anderson, I. E., and Lewandowski, J. J., Effect of tube processing methods on microstructure, mechanical properties and irradiation response of 14YWT nanostructured ferritic alloys, Acta Materialia, vol. 134, pp. 116-127, 2017.
L. Zhou, Tang, W., Ke, L. Q., Guo, W., Poplawsky, J. D., Anderson, I. E., and Kramer, M. J., Microstructural and magnetic property evolution with different heat-treatment conditions in an alnico alloy, Acta Materialia, vol. 133, pp. 73-80, 2017.
E. M. H. White, Kassen, A. G., Simsek, E., Tang, W., Ott, R. T., and Anderson, I. E., Net Shape Processing of Alnico Magnets by Additive Manufacturing, Ieee Transactions on Magnetics, vol. 53, p. 2101606, 2017.
L. Tian, Anderson, I. E., Riedemann, T., and Russell, A., Production of fine calcium powders by centrifugal atomization with rotating quench bath, Powder Technology, vol. 308, pp. 84-93, 2017.
L. Q. Ke, Skomski, R., Hoffmann, T. D., Zhou, L., Tang, W., Johnson, D. D., Kramer, M. J., Anderson, I. E., and Wang, C. Z., Simulation of alnico coercivity, Applied Physics Letters, vol. 111, p. 022403, 2017.
2016
K. N. Reeve, Holaday, J. R., Choquette, S. M., Anderson, I. E., and Handwerker, C. A., Advances in Pb-free Solder Microstructure Control and Interconnect Design, Journal of Phase Equilibria and Diffusion, vol. 37, pp. 369-386, 2016.
E. Aydogan, Pal, S., Anderoglu, O., Maloy, S. A., Vogel, S. C., Odette, G. R., Lewandowski, J. J., Hoelzer, D. T., Anderson, I. E., and Rieken, J. R., Effect of tube processing methods on the texture and grain boundary characteristics of 14YWT nanostructured ferritic alloys, Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, vol. 661, pp. 222-232, 2016.
E. M. N. White, Kassen, A. G., Dennis, K. W., Palasyuk, A., McCallum, R. W., and Anderson, I. E., ENHANCED POWDER-PROCESSED ALNICO MAGNETS BY THERMAL GRADIENT CONTROL, International Journal of Powder Metallurgy, vol. 52, pp. 33-39, 2016.
E. M. H. White, Heidloff, A., Byrd, D., Anderson, R., and Anderson, I. E., Ni-base superalloy powder-processed porous layer for gas cooling in extreme environments, Powder Metallurgy, vol. 59, pp. 181-187, 2016.
K. N. Reeve, Choquette, S. M., Anderson, I. E., and Handwerker, C. A., Rapid Solidification of Sn-Cu-Al Alloys for High-Reliability, Lead-Free Solder: Part I. Microstructural Characterization of Rapidly Solidified Solders, Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, vol. 47A, pp. 6507-6525, 2016.
K. N. Reeve, Choquette, S. M., Anderson, I. E., and Handwerker, C. A., Rapid Solidification of Sn-Cu-Al Alloys for High-Reliability, Lead-Free Solder: Part II. Intermetallic Coarsening Behavior of Rapidly Solidified Solders After Multiple Reflows, Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, vol. 47A, pp. 6526-6541, 2016.

Pages