Iver E. Anderson

Adjunct Professor
Address
222 Metals Development
The Ames Laboratory
Ames, IA 50011-3020
Phone 515-294-9791
Fax 515-294-8727
Email andersoni@ameslab.gov

Research Interests

  • Powder metallurgy
  • Rapid solidification
  • High-pressure gas atomization
  • Centrifugal atomization
  • Powder processing of magnetics
  • Electronic and Stuctural Materials
  • Joining Materials Design

        Project Affiliations:

(Chronologically most recent on top)Education

  • Ph.D. Metallurgical Engineering, University of Wisconsin-Madison, 1982
  • M.S. Metallurgical Engineering, University of Wisconsin-Madison, 1977
  • B.S. Metallurgical Engineering, Michigan Technological University, 1975

(Chronologically most recent on top)Professional Appointments

  • 1994 - present Adjunct Professor, Materials Science and Engineering Department, Iowa State University
  • 1987 - present Principal Investigator, Institute for Physical Research and Technology, Iowa State University
  • 1991 - present Senior Metallurgist, Metal & Ceramic Sciences Program, Ames Laboratory, Institute for Physical Research and Technology, Iowa State University
  • 1997 - 2001 Program Director, Metallurgy and Ceramics Program, Ames Laboratory, Institute for Physical Research and Technology, Iowa State University
  • 1991 - 1994 Adjunct Associate Professor, Materials Science and Engineering Department, Iowa State University
  • 1989 - 1991 Adjunct Assistant Professor, Materials Science and Engineering Department, Iowa State University
  • 1987 - 1991 Metallurgist, Metallurgy & Ceramics Program, Ames Laboratory, Institute for Physical Research and Technology, Iowa State University
  • 1982 - 1987 Staff Metallurgist, Materials Science and Technology Division, U.S. Naval Research Laboratory

(Chronologically most recent on top)Honors & Awards

  • 2008 Distinguished Scientist/Engineer from EMPM Division of TMS
  • 2008 Excellence in Research Award from MSE Department, Iowa State University
  • 2006 Fellow of American Powder Metallurgy Institute
  • 2006 Iowa Inventor of the Year Award
  • 2001 Energy 100 Award
  • 1996 TMS Distinguished Service Award
  • 1994 Fellow of ASM International
  • 1991 R&D-100 Award
  • 1991 Federal Laboratory Consortium, Award for Excellence in Technology Transfer

(Chronologically most recent on top)Publications with the Ames Laboratory

2014
Tian L; Russell A; Anderson I . 2014. A dislocation-based, strain-gradient-plasticity strengthening model for deformation processed metal-metal composites. Journal of Materials Science. 49:2787-2794. abstract
Export: Tagged BibTex

2013
Tian L; Anderson I; Riedemann T; Russell A; Kim H . 2013. Prospects for novel deformation processed Al/Ca composite conductors for overhead high voltage direct current (HVDC) power transmission. Electric Power Systems Research. 105:105-114. abstract
Export: Tagged BibTex

Palasyuk A; Blomberg E; Prozorov R; Yue L; Kramer M J; McCallum R W; Anderson I E; Constantinides S . 2013. Advances in Characterization of Non-Rare-Earth Permanent Magnets: Exploring Commercial Alnico Grades 5-7 and 9. JOM. 65:862-869. abstract
Export: Tagged BibTex

Xing Q; Miller M K; Zhou L; Dillon H M; McCallum R W; Anderson I E; Constantinides S; Kramer M J . 2013. Phase and Elemental Distributions in Alnico Magnetic Materials. IEEE Transactions on Magnetics. 49:3314-3317. abstract
Export: Tagged BibTex

Tian L; Kim H; Anderson I; Russell A . 2013. The microstructure-strength relationship in a deformation processed Al-Ca composite. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 570:106-113. abstract
Export: Tagged BibTex

2012
Tang W; Xing Q F; Dennis K W; Oster N T; Kramer M J; Anderson I E; McCallum R W . 2012. Anisotropic Hot-Deformed MRE-Fe-B Magnets With Zn Powder Addition (MRE = Nd plus Y plus Dy). IEEE Transactions on Magnetics. 48:3147-3149. abstract
Export: Tagged BibTex

Rieken J R; Anderson I E; Kramer M J; Odette G R; Stergar E; Haney E . 2012. Reactive gas atomization processing for Fe-based ODS alloys. Journal of Nuclear Materials. 428:65-75. abstract
Export: Tagged BibTex

Boesenberg A J; Anderson I E; Harringa J L . 2012. Development of Sn-Ag-Cu-X Solders for Electronic Assembly by Micro-Alloying with Al. Journal of Electronic Materials. 41:1868-1881. abstract
Export: Tagged BibTex

Kramer M J; McCallum R W; Anderson I A; Constantinides S . 2012. Prospects for Non-Rare Earth Permanent Magnets for Traction Motors and Generators. JOM. 64:752-763. abstract
Export: Tagged BibTex

Oster N T; Cavanaugh D T; Dennis K W; Kramer M J; McCallum R W; Anderson I E . 2012. Effects of Ag additions on melt-spun RE2Fe14B microstructure and texture. Journal of Applied Physics. 111:07a723. abstract
Export: Tagged BibTex